Contemporary III - Elevation Chiropractic Table

*Price of the table will vary as the base cost starts at $3,799. The price will increase based on the features and upgrades you choose. Tables are shown in pictures with varied configurations.

NOTE: Currently out of stock. Please check back soon!

Our Contemporary III Elevation table is truly one of a kind. Mounted on a double (660 pound) three-stage column, you get the lifting capacity your practice needs. In addition, your new table will be capable of starting as low as 18 inches and elevating to 30 for accommodating the most extensive range of Doctor heights and techniques. Our table's 12-inch lifting range is offers a unique advantage over similar tables on the market.

Included drops as standard on the table are a Cervical Flexion/Extension Headpiece, Lumbo/Pelvic Drop, Knee Break and Foot Extension.

The following optional drop upgrades are also available: Forward Cervical Drop, Toggle Drop, Elevating Cervical Headpiece, Upper Thoracic Drop, Thoraco/Lumbar Drop, Propping Thoracic Section to 40 degrees with drop operational to 20 Degrees and a Lumbo/Pelvic Propping Section to six inches with drop active through entire range.

The cocking method for all drops is bilateral handles. Controls - drop tension, elevation foot pedal and key switch - can be located on either the left or right side based on your personal preference.

Drops are a full 0.75 inches and can be adjusted to a zero-force fall. We rate the drops for use on patients up to 600 pounds.

Base Table Includes:

Cervical Flexion/Extension Headpiece
Lumbo/Pelvic Drop
Knee Break
Foot Extension
Face Paper Hardware
Arm Rests
Option of left or right side controls

Optional Upgrades:

Forward Cervical Drop
Toggle Drop
Elevating Cervical Headpiece
Upper Thoracic Drop
Thoraco/Lumbar Drop
Propping Thoracic Section to 40 degrees with drop operational to 20 Degrees
Lumbo/Pelvic Propping Section to six inches with drop active through entire range

Table Body Dimensions: 70" x 22" (120lbs, 55kg). Weight is approximately 150 lbs

General Characteristics:

7 gauge all steel powder coated frame
Height is adjustable from 18 - 30 inches.
The Firm Foam used as standard on this table is a combination of 1.5 inches of medium over 1 inch of 120 lb compression firm.

Shipping this table anywhere within the contiguous 48 US states is $500. Unless shipping to FL in which the cost is $325.

Table ships fully assembled via freight.

Pickup is also available at no charge to you. Just visit our "Contact Us" page to find our address.

Your week of shipment is issued after the order is placed due to lead times varying. If you need a table by a specific date, be sure to reach out to us before placing an order to ensure we can have the table arrive by the time you need it.

If you are outside of the contiguous 48 US states, be sure to contact us directly as we do ship tables worldwide and would still love one of our tables in your office.

ORDER CANCELLATIONS: Table orders may be canceled within 48 business hours of placement without penalty, excluding Practice Specials. Practice Specials may be cancelled within 24 hours of placement without penalty. If orders are canceled after the stated period, then a penalty of 40% will be assessed. Refunds are issued within 10 business days of cancellation by check sent via tracked mail.

TABLES STORED: If you have selected to have your completed table stored at our facility until you are ready to authorize its shipment to you, the table will be considered “delivered” on the day it is placed in storage for the purpose of these terms. Sun Chiropractic Tables does not charge for storage when the length is six months or less.

10 DAY RETURN POLICY: We offer a 10 day, no-questions asked return policy for all the standard tables we offer. Please note that this policy does NOT include tables with custom colors or other customized options*. If not satisfied with your table for any reason you may return it at your expense for a complete refund excluding original shipping paid. You must contact us within 10 days of arrival to let us know that you will be returning the table. This allows you 10 full days to decide if you are happy with your purchase. Returns will not be accepted if you fail to contact us within 10 days of the table's delivery. Tables must be returned in "new" condition. Tables not returned in "new" condition will have their refund decreased by the stated cost of noted damage.

*Tables with a custom color or other custom options may not be returned for any reason.

WARRANTY:

All Standard Line Tables carry a one-year warranty on materials and workmanship (upholstery is warranted for workmanship only).
Prestige Line and Contemporary Tables carry a two-year warranty on materials and workmanship (upholstery is warranted for workmanship only).
Elevation columns installed on Contemporary tables are warranted for one year by the manufacturer of the provided columns.
As a courtesy service we will ship replacement parts to you at no expense, however you will be responsible for the installation of the provided parts. The exception to this service is tables which have been shipped outside the Continental US. In such situations the customer will be responsible to cover applicable shipping costs less an equivalent Domestic shipping allowance.
At Sun Chiropractic Tables, LLC sole discretion “hard parts” (defined as those mechanical table parts subject to wear and breakage) may be provided to the original customer at no charge except for the cost of shipping, at any time both before and after the termination of the warranty periods stated above.

Made in the USA

Base price includes Lumbo/Pelvic Drop, Flex/Ext Headpiece, Foot Extension and Knee Break.

$3,799.00

*ShopPay installments estimation is not final and will change at checkout depending on upgrades selected.

*Write-Offs for Qualifying Equipment

Name: Contemporary III - Elevation Chiropractic Table
Availability: OutOfStock

Did you know you may be eligible for an equipment tax deduction or credit? According to Section 179 and Section 44 of the IRS tax code, you may be able to deduct the total purchase price or apply a credit up to 50% on qualifying equipment. (Please consult your tax professional to determine your personal eligibility).

Section 179

Section 179 of the IRS tax code allows businesses to deduct the FULL PURCHASE PRICE of qualifying equipment and/or software purchased or financed during the tax year from your gross income!

How Section 179 Works

● In the past, when your business bought qualifying equipment, it typically wrote it off a little at a time through depreciation.

● Section 179 allows your business to write off the entire purchase price of qualifying equipment for the current tax year.

● Businesses can use Section 179 to purchase needed equipment right now instead of waiting. In addition, for most small businesses, the entire cost of qualifying equipment can be written-off (up to $1,000,000).

ADA, Section 44 (Disabled Access Credit)

Under Section 44, The Americans with Disabilities Act (ADA) allows you to apply a credit of 50% of your purchase amount, up to $10,250 (maximum credit of

$5000) for qualifying equipment to offset the cost of purchasing specific adaptive equipment.

Do You Qualify?

Do you have:

● Total revenues of $1,000,000 or less in the previous tax year?

● Or 30 or fewer full-time employees?

Download IRS Form 8826 to claim the credit.

https://www.ada.gov/form8826.pdf

*This is not tax advice. Please consult your tax professional to determine your eligibility.

How do you disinfect or clean the tables between patients? We suggest using a solution of 2% common household bleach to water for between patient and daily cleaning. However, Uniroyal, the manufacturer of Naugahyde, suggests that for cleaning during the COVID pandemic that a solution of 10% household bleach to water be used. We caution that using a bleach solution of this concentration requires you to rinse the table with a spray of plain water after cleaning to remove all bleach residue. This will prevent the staining of patients clothes during treatment. Here is a link to the official cleaning guide from the manufacture themselves. Click here for the cleaning guide

Can you explain the difference between the default firm foam and the optional medium foam? Our firm foam is actually a 1.5 inch layer of 50lb compression foam which is comfortable for your patient to lie on over a 1 inch layer of 120lb extra firm foam on the bottom. It's like the cushion has an anterior board built in. Your patient can lie prone on it comfortably but you will not have any trouble bringing them to tension and getting a good adjustment. The medium foam is a solid piece of the 50 lb compression foam. It is ideal for doctors doing lower force techniques or where the patient will lie either prone or supine on the table for periods longer than 30 minutes while getting treatment.

How are the drops on your tables as they compare to other table manufacturers? We think that our drops are crisp and fast. The drop blocks are manufactured out of HDPE(High Density Polyethylene) which is a self lubricating plastic. This material works well with the steel drop plungers and does not become grooved with heavy use like aluminum or steel blocks but rather deforms with the plunger as the drop falls. This keeps the drops running like new for many years.

How heavy of a patient are your drops designed to work with? Our drops are designed to work with patient's up to 500lbs. If they do not work with patients of this weight please contact us to get a replacement drop. If your practice will be mostly large patients over 250 lbs, then let us know that and we can build your drops up with springs ideal for larger patients. These springs larger patients do NOT increase the capacity of the drop, rather they make the tension adjustment range more sensitive at the larger end of the scale rather than at the average range of the scale which is more like
125-250 lbs.

Table Wings

29" Usable table surface

Our table wings are available for an additional charge enabling you to widen your adjusting surface to 29" when needed for specific techniques.

Versatile Headpiece

Everything you need

The headpiece comes standard with elevation and lateral bending. It also features our crisp and responsive, forward cervical and toggle drop combo. Also equipped with our face paper holder and cutter.

Watch it here

double Collumns

660-pound lift capacity

Mounted on a double (660 pound) three-stage column, you get the lifting capacity your practice needs. In addition, your new table will be capable of starting as low as 18" and elevating to 30" to accommodate the most extensive range of doctor heights and techniques.

watch it here

Propping cushions

Thoracic & Lumbar

The table features a propping thoracic section and a lumbar propping section with the lumbar drop remaining usable through the whole range.